National Instruments SFP+ Cable

The National Instruments SFP+ Cable is designed to provide Ethernet connectivity over copper. This cable can be used with National Instruments devices which come with SFP ports. The two connectors incorporated in the SFP+ Cable are 1-Pin, Male SFP+ connectors. The SFP+ Cable works with small-factor pluggable (SFP) ports on National Instruments Controllers, USRP RIO, and FlexRIO devices. For data and signal transmission, this cable utilizes a twin axial cable. You can acquire this cable in different lengths under these part numbers: 0.5 m (Part Number: 784076-0R5), 1 m (Part Number: 784076-01), 3 m (Part Number: 784076-03), and 5 m (Part Number: 785681-05).

There is another variation of the SFP+ Cable with 2-Pin, LC/LC Duplex connectors. This version is available with multimode optical fiber in 10 m (Part Number: 784184-10), 50 m (Part Number: 784184-50), and 100 m lengths (Part Number: 784184-100). The last version of the NI SFP+ Cable also has 2-Pin, LC/LC Duplex connectors, but has single mode optical fiber and is available as a 10 m cable (Part Number: 784185-10).

The National Instruments SFP+ Cable is designed to support up to 10.31 Gbps maximum transmission speed. The SFP connector incorporated in this cable is designed as per the parameters defined in the relevant MSA. The NI SFP+ Cable utilizes two conductors for data transmission unlike one conductor based coaxial cables. With this cable, you can fulfill your differential signal applications at high speeds.